Big Baby is a 150mm X8 for 3" props. It has a 4mm base plate and a 2mm top plate. The motors are stacked using low profile 2mm catdog mounts. Stack height is 25mm (leave...

Big Baby is a 150mm X8 for 3" props. It has a 4mm base plate and a 2mm top plate. The motors are stacked using low profile 2mm catdog mounts. Stack height is 25mm (leave...

Description MXC TAYCAN-Frame Kit Specification SKU: MX C3 Taycan rack DT-FK19-MXC3-TAYCANWheelbase: 158mmWeight: 175gPaddle size: 3 inchTop plate: 2mmBase plate: 2.5mmVoltage (Recommendation): 4-6SFlight control mounting hole : 20mm (M2) /30.5mm (M3)Motor mounting hole position: 12mmCamera pitch:...

Specification: Diatone has introduced a number of changes to the newly optimized Roma F5 V2, including the stiffness and strength of the frame arms. We've also strengthened the metal parts at the front of the frame and upgrade the alloy material from 7075 to titanium steel. For that extra high-end, tactile quality, we've treated the surface of the metal parts as well and changed the screws fixing the metal parts from M2 size to M3-sized specifications.  For our digital HD fans, we haven't forgotten you! This time, we've; added mounts for the twin DJI antennas.  Roma F5 V2's injection-molded protection parts not only add a dash of color with our new color options but also offer better protection for your gear. The GoPro mount angle can be adjusted for faster changes on the fly. For the best flying experience, the V2 comes in a slammed configuration for stability.   Roma F5 V2 4S PNP Version Camera: RUNCAM PHOENIX2Antenna: MAMBA Ultra RHCPVTX: MAMBA Ultra 1000MWFC: MAMBA APP F722 MK1ESC: MAMBA F50 _BL32Motor: MAMBA TOKA...

The podium owning Switchback, Optimized and Refined. Stiffer, smaller, 20×20 only. The podium owning Switchback, Optimized and Refined. Stiffer, smaller, 20×20 only. *RANDOM TPU COLOR (BLACK / ORANGE) LITE Smallest possible arm length that can...

The Hydrophobe is a 255mm water resistant 5" cine quad with a 2mm aluminum mid plate that doubles as a heat sink for your esc and vtx. It has a 3mm bottom carbon plate, 6mm...

HOW TO APPLY  Tear down all parts so you can easilly put KOTKING on them, no need to unsolder Clean up all surfaces with air blower, brush, or cloth to avoid dust, oil, moist or...

MAMBA | Super Big Soldering Pad MAMBA Basic F405 MINI MK3.5 Diagram Link From Help Centre Link Fixed Add I2C function When you connect the USB, the receiver and OSD settings can be saved Increase...

Description FC SpecificationsMAMBA Basic F722MK3MCU: 216MHz STM32F722GYRO: MPU6000Barometer: YesOSD: YesBlackbox: 16M Flash MemoryParts: 6SetESC Soft: Dshot300/600/1200ESC Telemetry: YesPower Led: YesLED Controller: BF LED/MB LED（4 Set 2812 LED）F.Port: YesRSSI: YesBuzz: YesInput: 3~6S Lipo (12.6~25.2V)TVS Protection: YesBEC:3.3V 0.5A& 5V 3A (System Power)&5V...

RadioMaster - Remove Before Flight Key chain Size: 2.5x12.5cm（Excluding metal parts）  

Keep your thumbs/fingers from sliding with these durable stick ends from RadioMaster. These stick ends are made to fit radio gimbals with M4 threaded shafts. Different colors to choose from! (Black, Red) Keep your thumbs/fingers...

Introducing the Radiomaster R-Series! This R81 Nano Receiver (with Sbus Output) has 8 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers.  Features Frsky D8 Compatible 8 Channels...

RadioMaster - TX16S HALL Carbon | Gold | Silver Edition OpenTX Multi Protocol 16ch Transmitter. TX16S BASIC SPECIFICATIONS: Size: W183*H212*T66mm Weight: 736g (without battery) Voltage: DC7-8.4V Battery Compartment：25*52*97mm Battery: 2 x 18650 (tray supplied) or...

RadioMaster set out to create the very best radio in its class for Crossfire compatible radios. The TX16S has the best of everything they could fit into the radio, right from the very start. Super...

Developed with Gab707, Siccario is the ultimate Cinelifter, a 405mm X8 designed to optimize weight distribution for ideal flight characteristics. It has upswept 10mm arms that put the line of thrust right through the heaviest...

Squirt is a 160mm 3" ducted quad. The ducts generate about 240g more thrust so Squirt is a peppy flyer that can carry a Hero. They also double as prop guards so it's safer to...

The T-Motor F1507 V2 is the second version of one of T-Motor's greatest additions to the Cinewhoop class of motors. The cinematic design is perfect for a smooth flight and the high torque control experience...

Sometimes you got that special project with special screws you dont have bits for. This 24bits kit might be able to help you out. Any workbench should have a set just in case! Sometimes you...

Precision GPS / Glonass module for betaflight or pixhawk. SPECIFICATION Chipset - ublox UBX-M8030 Flash memory for saving configuration. Frequency - L1, 1575.42MHz ; L2,1561.10MHZ；L3,1602.00MHZ Baud Rate - 4800bps-921600bps (Default - 9600bps) Channel - 72ch...

Thicc 2.1 is a 390mm 7 or 8" X8 Cinelifter. Arms are 8mm carbon, main body plates are 2.5mm, bottom plate is 3mm. With 2 spots for 30x30 fc stacks, standoff height is 20mm. Feel free...

Thicc 2.1 is a 390mm 7 or 8" X8 Cinelifter. Arms are 8mm carbon, main body plates are 2.5mm, bottom plate is 3mm. With 2 spots for 30x30 fc stacks, standoff height is 20mm. Feel free...